2021 Autel MaxiIM IM508 IMMO Key Programmer Full System Auto Diagnostic Scanner

Description

【CAR KEY PROGRAMMING TOOL FOR AUTO LOCKSMITH】: Coming with XP200 Key Programmer, Autel IM508 is a best value car key programming tool that combines car key programming, all systems diagnostics and most useful service functions. Compatible with XP400 key programmer, it can further extend its capabilities to become Autel top level key programming tool. IM508 is an Advanced IMMO & Key Programming tool which perform various functions like Read PIN/CS(All Key Lost), Key Generation, Key Learning etc. As a professional diagnostic scanner, IM508 comes with most useful service functions like Oil Reset, Reset Parking Brake Pads after replacement, SAS Calibration, BMS and etc. Autel IM508 can quickly diagnose all available modules of more than 80 US, Asian and European makes and models on the market.
Store category
Sign Up Now !
You may also like
Product Description
Autel MaxiIM IM508
【
CAR KEY PROGRAMMING TOOL FOR AUTO LOCKSMITH
】
: Coming with XP200 Key Programmer, Autel IM508 is a best value car key programming tool that combines car key programming, all systems diagnostics and most useful service functions. Compatible with XP400 key programmer, IM508 can further extend its capabilities to become Autel top level key programming tool. The
XP400 Pro
Adapter is designed to work with Autel IM508 Scan Tool to perform various IMMO special functions and Chip adapter, MCU Read/Write tasks and etc.
NOTE
: IMMO & Programming are NOT universally compatible. Please send VIN number via ebay message to check compatibility.
【
COMPREHENSIVE IMMO & KEY PROGRAMMING
】
: IM508 can perform: Read PIN/CS(All Key Lost), key generation, key learning, remote learning on Benz FEM/BDC Key Learning/ECU Adaptation, BMW CAS3/2 Key Learning, VW/Audi/Skoda/Seat IMMO III/IV/V Add Key, All Key Lost, IMMO ECU reset/adaptation/refresh/coding, Transponder read & write, EEPROM/MCU read & write. IM508 is a professional automotive key programming tool that combines key programming, all car systems diagnosis and advanced service functions.
【
MOST USEFUL SERVICE FUNCTIONS
】
: As a professional diagnostic scanner, IM508 comes with most useful service functions like Oil Reset, Reset Parking Brake Pads after replacement, SAS Calibration, BMS and etc.
NOTE
: Service & Special Functions are NOT universally compatible.
【
OE-LEVEL ALL MODULES DIAGNOSIS
】
: Autel MaxiIM IM508 automotive scan tool can quickly diagnose all available modules of more than 80 US, Asian and European makes and models on the market. To check compatibility with your vehicles, please send VIN to us via ebay message to check. With complete capabilities for codes, live data, ECU Info and etc, IM508 is the perfect automotive diagnostic tool pick for auto technicians/ mechanics.
UPDATE:
2021 Newest - July newly added features on Autel IM508:
For Fiat:
1.Adds Key Learning (Bypass PIN)Function for Argo (2017-2020), Cronos (2017-2020),Toro (2016-2020),Mobi (2016-2019) and New Fiorino (2008-2019)[Globallnitial Launch]
2. Adds Key Learning for Blade Key Function for Awventura (2014-2018). [GlobalInitial Launch]
3. Adds Key Learning for Blade Key Function for 500x (2018-2020), Eaea (2018-2020) and Tipo(2018-2020)
For BMW:
1.Supports New Software Version (swfl_00002419_085_010_080) for KeyLearning Function for FEM/BDC Immobilizer System.[Global Initial Launch]
2. Adds 196 Software Versions,Supporting Read ISN (OBD Mode) Function forB48/B58 Engine.[Global Initial Launch]
DESCRIPTION
Autel IM508 is a professional car key programmer and immobilizer that combines key programming, all systems diagnosis and advanced service functions. With comprehensive IMMO related functions and programming capabilities, IM508 Car Key programming tool can perform: Read PIN/CS(All key lost), key generation, key learning, remote learning, IMMO ECU Reset/Adaptation/Refresh/Coding, IMMO Data Backup/Restore, read & write EEPROM and basic MCU read & write.
NOTE
: With XP400 Key Programmer, IM508 will further extend its capabilities to become one of Autel top level key programming tools.
NOTE
: To perform "synchronize VIN code and IMMO Data" on newly replaced ECU, you have to program the new ECU first. IM508 can not perform ECU programming.
FEATURES
COMPLETE CAPABILITIES FOR CODES, LIVE DATA, ECU INFO AND ETC
Autel MaxiIM IM508 auto scan tool comes with complete capabilities for codes, live data, ecu information,and etc. IM508 car diagnostic tool can access & diagnose all available systems, retrieves vehicle diagnostic trouble codes and event codes, show live data stream in text, graph or analog.
COMPREHENSIVE AUTO KEY PROGRAMMING TOOL FOR AUTO LOCKSMITH
Autel MaxiIM IM508 Car Key Programming Tool comes with comprehensive IMMO functions, including: Read PIN/CS(All Key Lost), key generation, key learning, remote learning on various makes like, Benz FEM/BDC Key Learning/ECU Adaptation, BMW CAS3/2 Key Learning, VW/Audi/Skoda/Seat IMMO III/IV/V Add Key, All Key Lost, IMMO ECU reset/Adaptation/Refresh/Coding, IMMO Data Backup/Restore
Note
: When connected to XP400 key programmer, IM508 will be able to support Benz 3rd Generation IMMO, BMW CAS4 Key Learning and VW/Audi MQB(VDD & JCI) Add Key, IMMO V A4/A5/Q5 2015+ Key Learning.
Note
: To further extend the capabilities of Autel IM508 Key Programming Tool to BMW CAS4 Key Learning, you may choose purchase XP400 Key Programmer separately with an expense of a few hundred bucks more.
KEY CHIP PROGRAMMING WITH XP200 KEY PROGRAMMER
With Autel XP200 Key Programmer, Autel IM508 automotive key programming tool can perform accessing the key chip, read, retrieve and write key information, EEPROM read & write and basic MCU read & write, as well as other key related functions. The Programming application requires connection between the tablet and the XP200 Key Programmer, and NO VEHICLE CONNECTION IS REQUIRED.
Note
: When connected to XP400 key programmer, IM508 will further extend its key chip programming capabilities to perform MCU Read & Write, IMMO ECU Read & Write, MC9S12 Encryption Chip Read & Write, IC Card Read & Write, Mercedes Infrared Key Read & Write, Remote Frequency Detect.
COMPATIBLE WITH XP400 KEY PROGRAMMER TO FURTHER EXTEND ITS CAPABILITIES
Autel MaxiIM IM508 is one-of-its-kind ultra-portable affordable key programmer and immobilizer that combines IMMO, programming, diagnostics and car services. When connected to XP400 key programmer, IM508 will be able to support Benz 3rd Generation IMMO, BMW CAS4 Key Learning and VW/Audi MQB(VDD & JCI) Add Key, IMMO V A4/A5/Q5 2015+ Key Learning.
IM508 covers the basic most useful programming capabilities like Key Read & write, EEPROM Read & Write and basic MCU Read & Write. While connected to XP400 key programmer, IM508 will perform MCU Read & Write, IMMO ECU Read & Write, MC9S12 Encryption Chip Read & Write, IC Card Read & Write, Mercedes Infrared Key Read & Write, Remote Frequency Detect to become one of Autel top level key programming tools.
SMART MODE + EXPERT MODE
The IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc.
Smart Mode
: for guided and automated key learning
Expert Mode
: for advanced key learning
Note
: The IMMO application requires a data link to the IMMO electronic control system of the test vehicle for diagnosis via OBD II connection.
AUTO VIN SCAN
Autel MaxiIM IM508 automotive diagnostic tablet features the latest VIN-based Auto VIN Scan technology to identify vehicles and it is applied to IMMO, Programming, Diagnostics and Services.
Note: Only Smart Mode can be accessed by using Auto VIN Scan.
MOST USEFUL SERVICE FUNCTIONS
Oil Reset
: Reset service mileage & service intervals after engine oil is changed.
EPB Service
: Resetting parking brake pads after replacement and etc.
SAS Calibration
: Reset the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.
DPF Regeneration
: Performs DPF Regeneration to clear the blockage through continuous burning of the particulate matter captured in the DPF filter and turn off DPF light.
BMS
: Register the battery replacement and etc.
OE-LEVEL ALL MODULES DIAGNOSIS
Autel MaxiIM IM508 Key Programmer can access and perform OE-Level diagnosis on all available vehicle modules including but not limited to PCM, ECM, EPS, PDM, BCM, TPM, SCCM and etc and covers all major electronic systems like ABS, SRS, Engine, Transmission, Brake System and etc.
UNMATCHED VEHICLE COVERAGE
Autel IM508 Diagnostic Scanner Tool comes with powerful OE-level diagnostics for more than 80 US, Asian and European makes and models. To check compatibility, please refer to Q/A or message systems.
SUPPORT LANGUAGE
English, Spanish, Portuguese, French, German, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian
WARRANTY:
12-month warranty for any possible quality problems.
TIPS:
Welcome to get technical support via eBay message, or hotline on Autel official site, if you are unsure whether the tool is suitable for your device, or any questions.
Specifications
Brand
Autel
Model
MaxiIM IM508
Processor
Quad-core Cortex-A9 processor(1.6 GHz)
RAM
1 GB DDR4
Storage Capacity(ROM)
32 GB SSD
External Memory
MicroSD Card Max 32 GB
Operating System
Android 4.4.2, KitKat
Screen Size
7 inch
Screen Type
LCD capacitive touch screen
Screen Resolution
1024 x 600 Pixels
Sensor
Ambient light sensor for brightness auto changing
Connectivity
WiFi
USB 2.0
Mini USB 2.0
Support Language
English, Spanish, Portuguese, French, German, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian
Features
Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly, All System Diagnostic, Data Manager
Power and Battery
3.7 V/5000 mAh lithium-polymer battery
Charges via 5 VDC power supply
Working Time
Around 4.5 hours of continuous use
Input Voltage
5V/1.5A Adapter
Operating Temp
0 to 50°C (32 to 122°F)
Storage Temperature
-20 to 60°C (-4 to 140°F)
Dimensions (WxHxD)
300 mm (11.81”) x 220 mm (8.66”) x 50 mm (1.97”)
Weight
885g(2.31|b.)
Protocols
ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
Package Included
1 x Autel MaxiIM IM508 Main Unit
1 x AAC001 – MED17 Cable
1 x Mazda-17 Adaptor
1 x Honda-3 Adaptor
1 x KIA-10 Adaptor
1 x KIA-20 Adaptor
1 x XP200 Key Programming Device
1 x USB External Power Adapter
1 x Main cable
1 x Mini USB Cable
1 x Carrying Case
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal only.
All major credit cards are accepted through secure payment processor PayPal.
Payment must be received within 3 days of auction closing.
When buying multiple items, please use the eBay shopping cart and check out once for all the items instead of paying for them individually.
When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
Please Note
Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding /buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We are not responsible for custom duties and related taxes. Orders will be shipped as a gift or as a sample. In general, no custom duties and tax will be charged.
Delivery details
The default shipping method is via UPS or USPS which will take about 3-7 business Days in transmit for the hot season is coming. Please kindly be patiently wait for your order.
We will ship according to your EBAY address but sorry that we can not accept P.O.BOX address.
Please make sure it’s correct and include phone number via PayPal when you make payment. This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information.
If you need to change your address, Please change it in PayPal first before you pay.
Items are generally shipped out within next 2 business days after payment has been verified. All items are shipped by Standard Registered Airmail.
Terms of sales
Buyer Guarantee
We assure you that we are a honest and super reliable seller on ebay, any problems can be solved in a satisfing way for you and any loss will not be brought to you as long as you will kindly contact us via ebay message or your private email. Please kindly contact us firstly if your purchasing is in trouble before leaving any bad feedback including neutral and negative feedback and leaving 3 stars or less stars to me on 4 criteria.
Return Policy
Please return the item within 30 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.
About us
WHO WE ARE?
We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness.
WHAT WE HAVE?
We have office in Shenzhen,China and 2 warehouses that are located in HongKong and US.We assure you not only good service but also to be ship as soon as possible.
Contact us
We are committed to your satisfaction after your purchase.
If you are not satisfied with your purchase in any way please give us an opportunity to try and make it right before leaving feedback.
We will answer your questions within 1 working days.
Customer Service Hours: M-F: 9:00AM - 18:00PM BST (Beijing Standard Time)
Feedback
On Sep-18-21 at 19:09:04 PDT, seller added the following information: