CRP S5 OBD Diagnostic all Control Units Fits Saab 9-4 X, Epb , Oil Reset

Description

CRP S5 OBD Diagnostic all Control Units Fits Saab 9-4 X, Epb , Oil Reset
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Short item description for your eBay ad (will be displayed on smartphones)
Chip tuning
Vehicle diagnosis
Reversing systems
Car chargers
Automotive measurement technology
Item Description
LAUNCH
Creader Professional S5
Access to almost all control units, engine - ABS - airbag ...
Access to EPB, service reset, calibration of steering angle sensors
Plain text display - TFT color display
- >> up to 5 brands on one device << -
The OBD diagnostic device Creader Professional S5 was specially developed for OBD vehicles. It is used for a quick analysis of the fault memory of the engine, transmission, ABS and many other control units as they are installed in Allen newer vehicles. Our offered OBD diagnostic device model Creader Professional S5 is a high quality scanner. This professional diagnostic tool does not require a computer. The connection is only made by plugging it into the diagnostic socket in the vehicle and the device is immediately ready for use. Reading out the fault memory is therefore very easy. The errors are shown directly on the color display. The display is in plain text in German. Due to the simple operation with ten buttons, the device is very easy to use and suitable for every layperson. This professional diagnostic device for the small budget helps you with vehicle diagnostics. Simply examine your vehicle yourself before a visit to the workshop / inspection. So there are no more expensive surprises! Not only the engine control unit is supported, but almost all control units installed in the car. AAC, ABS, airbag, EPB, ESP, ......... and many others. With the Creader Professional S5, the inspection displays can also be reset, new batteries can be taught in and ABS brake bleeding can be carried out.
Up to 5 brand-specific software types can be installed on the Creader Professional S5. With the 5 brands, a complete diagnosis is possible on Allen control units. Thanks to the integrated double boot menu, the fault memory of the engine and transmission control unit can also be read out and deleted in Allen other vehicle brands with OBDII protocol language.
Please note that not all functions or all control units are available on Allen vehicles. We would be happy to check for you in advance whether the device is suitable for your vehicles.
The following vehicles are supported at SAAB:
9-3
9-3 sport
9-5
9-7 X
9-4 X
900
9000
Since the device can be updated, future models can also be read by the CRP S5, provided that these models have the current OBD standard.
the following brands are also supported:
Acura, Alfa Romeo, Audi, BMW, Chrysler , Citroen, Dacia, Daewoo, FordHolden , Honda, Hyundai, Infiniti, Jaguar, Isuzu, Kia, Lancia, Land Rover, Lexus, Mazda, Mercedes Benz, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Subaru, Suzuki , Toyota, Vauxhall, Volvo, VW
Your vehicle brand is not listed, or are you looking for a different diagnostic system?
Please contact us, we will be happy to advise you before buying.
The Creader Professional S5 can also read live data during operation. The live display of sensor data can be switched so that all relevant data is shown in different displays, such as:
• the temperature of the air drawn in
• Air mass / air flow rate
• engine speed
• Vehicle speed
• Position of the O2 sensor
• coolant temperature
• Slow correction
• Quick correction ........
Depending on the vehicle used, other live data is also made available.
Convincing advantages:
• Easy to read color display
• Reads all error codes in Allen control units (general and manufacturer-specific codes)
• Clears all codes in the control units
• Service reset function (inspection reset)
• Electric parking brake function (EPB)
• Battery management system function
• Calibration of steering angle sensor
• ABS brake bleeding
• Live data function
• Simple operation with ten buttons
• Stand alone device, no batteries or laptop required
• Can be updated via the Internet
Technical specifications
• Dimensions ~ 195 x 86 x 32 mm
• Cable length ~ 900 mm
• Display: TFT color with backlight
• Voltage range: 12Vdc, directly via the OBD interface
• Connector type: standardized 16 pol. OBD connector
• Housing: plastic
• Housing color: black red
scope of delivery
• OBD diagnostic device Creader Professional S5 incl. 5 x brand-specific diagnostic software
• 16 pin OBD cable adapter
• Operating instructions / technical documentation
• Transport bag
shipping
We offer the following shipping service providers:
Payment Methods
We offer the following payment methods:
Shipping
We always send high-quality goods as an insured package. The shipping costs are always stated directly in the offer. You only pay once for shipping, no matter how many items you buy from us. Our stated shipping costs include the postage costs, if required the outer packaging and filling material.
Why with us
Continuous improvement and expansion of our products, as well as the introduction of new components and features, characterize our high level of development and innovation and offer the customer the technology that is required. We do not sell you just any product, because we understand our trade. We would be happy to advise you before you buy!
OBD adapter cable accessories
Battery chargers
Reversing cameras
Monitors
Workshop tester
Battery tester
Chip tuning
Inspection reset
LAUNCH devices
Measuring device
Reversing alarm
Template powered by auction template-Pro
The OBD diagnostic device Creader Professional S5 was specially developed for OBD vehicles. It is used for a quick analysis of the fault memory of the engine, transmission, ABS and many other control units as they are installed in Allen newer vehicles. Our offered OBD diagnostic device model Creader Professional S5 is a high quality scanner. This professional diagnostic tool does not require a computer. The connection is only made by plugging it into the diagnostic socket in the vehicle and the device is immediately ready for use. Reading out the fault memory is therefore very easy. The errors are shown directly on the color display. The display is in plain text in German. Due to the simple operation with ten buttons, the device is very easy to use and suitable for every layperson. This pr
Marke
LAUNCH
Service Reset Funktion
Ja
Kalibrierung Lenkwinkelsemsor
ja
Updatefähig
ja via Internet
Steckertyp
OBD2 16 Pin
Menüsprachen
Deutsch, Englisch, Niederländisch, Französich & Spanisch
APS Bremsentlüftung
Ja
EPB Funktion
Ja
Zugriff auf alle Steuergeräte
ja
Zugriff auf Airbag
Ja
BMS Funktion
Ja
EAN
4251594891062
Herstellernummer
CRP S5
Produktgruppe
OBD Diagnosegerät
Istwertanzeige
ja
Kompatibilität
Universell passend für bis zu 5 Marken