OBD2 Scanner Car Diagnostic Tool Check Enigine 28 Maintenance Resets Code Reader

Description

MUCAR CS90 Professional Reset Tool For Mechanic & Workshop
Support 28 Reset Services(All Resets Lifetime Free for All Cars)
MUCAR CS90 currently supports 28 maintenance software, The maintenance software is completely
free to use and free to upgrade.
1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7.IMMO Key Programming
The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.
8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.
9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
11.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
12.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
13.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
14.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
16.EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
19.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.
20.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
24.ODO Reset
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.
25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the  automatic ascending and descending function of power window.
27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the  automatic ascending and descending function of power window.
Free Full OBDII Functions:
*-Read extensive current, pending and permanent codes in OBD system quickly
*-Clear detected fault codes and turn off the Check Engine Light efficiently
*-View graphical live data of vehicle's computer module(s) for easy analyses
*-View the vehicle's operating parameters at the moment a DTC is detected
*-Read I/M readiness status to have a vehicle inspected for state emissions compliance
*-Perform O2 sensor test to check fuel efficiency and vehicle emissions
*-Read the results of on-board diagnostic monitoring tests for specific components/systems
*-Retrieve the vehicle information of VIN, CINs, and CVNs completely
*-Perform the component Test by allowing initiating a leak test for the vehicle's EVAP system
One-Click WIFI Free Update Lifetime
1. Turn on the scanner
2. Connect to WIFI
3. Click the upgrade button on the home page to achieve one-click upgrade
Support 8 Languages
English, French, German, Spanish, Italian, Portuguese, Japanese, Russian
Support 126+ Car Brands and 1000+ Vehicles
USA：
For BXGM,
For
CHRYSLER,
For
AUSTFORD,
For
GM,USAFORD
EUROPE:
For
ASTONMARTIN,
For
AUDI,
For
BENZ,
For
BMW,
For
BXFIAT,
For
CITROEN,
For
FERRARI,
For
FIAT,GAZ,
For
LANDROVER,
For
MASE,RATI,
For
OPEL,
For
PAZ,PEUGEOT,
For
PORSCHE...
Austrillia:
For
AUSTFORD,
For
AUSTHOLDEN
Asia:
For
BAIC,
For
CHANGAN,CHANGCHENG,
For
CHANGHE,
For
DAEWOO,
For
DAIHATSU,
For
DFXK,FLYER,
For
FUTIAN,
For
HAFEL HMAZDA,
For
HONDA,
For
HUACHEN,
For
HYUNDAI,IKCO,
For
INDIANMARUTI,
For
INDIANTATA,ISUZU,
For
IVECO.IZH,
For
JACTY JIAO,
For
JINLONG,
For
JOYLONG,
For
JPISUZU,
For
KIA,
For
LIFAN,
For
LIUWEITY ,
For
LUXGEN,
For
MAHINDRA,
For
MALAYSIA PERODUA,
For
MALAYSIA PROTON,
For
MARUT,
For
MAXUS,
For
MAZDA,
For
MITSUBISHI...
Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
Product Parameters:
CPU:MT6580 CORTEX-A7 1.3GHz/4Core
Memory:1GB DDR3/8GB EMMC
Display:5 Inch/ 480*854 MIPI LCD Display Screen
TP:GT911 GFF
WIFI:802.11b/g/n 2.4GHz
USB:TYPE C*1
TF Card:Support SDHC High Speed Card
Battery:3.7V / 600mAH Lithium Polymer
Power Input:OBD 12V input or TYPE C 5V input
Packing List:
1*MUCAR CS6 Host
1*Manual
1*Charging cable
1*power adapter
Warranty service：
There is 24 months free warranty from the date of purchase. For any question or problem with this tool, please contact us for help directly and we will feed back to you within 24 hours.