THINKCAR THINKTOOL PRO Car Full System OBD2 Diagnostic Scanner ECU Coding Tool

Description

2021 THINKCAR THINKTOOL Pro 8" Professional Modular Diagnostic Scanner Thinktool Pro OBD Professional Diagnostic Scanner(For ALL BRANDS, As Launch X431 v+) 【Why  THINKTOOL Pro 8" Becomes CAR REPAIR SHOPS & MECHANICS 's First Choice】 Full System Diagnostic Tool + 28 Special Functions + ECU Coding + Actuation Test + 8 Expandable Module Functions(X431 V/V+ doesn't have!!Only Thinktool Pro has!) + Bluetooth/Wifi connection +Free Software + Android 10 OS running on 8-inch HD IPS Touch Screen + 32GB Storage+Multi Languages Supported + Wide Vehicles Coverage + 2 Years Free Update + 5 Years Warranty + Lifetime Free Tech Support.
2021 THINKCAR THINKTOOL Pro 8" Professional Modular Diagnostic Scanner
Thinktool Pro OBD Professional Diagnostic Scanner(For ALL BRANDS, As
Launch X431 v+
)
【Why  THINKTOOL Pro 8" Becomes CAR REPAIR SHOPS & MECHANICS 's First Choice】
Full System
Diagnostic Tool + 28
Special Functions
+
ECU Coding
+
Actuation Test
+ 8
Expandable Module
Functions(X431 V/V+ doesn't have!!Only Thinktool Pro has!) + Bluetooth/Wifi connection +Free Software + Android 10 OS running on 8-inch HD IPS Touch Screen + 32GB Storage+Multi Languages Supported + Wide Vehicles Coverage + 2 Years Free Update + 5 Years Warranty + Lifetime Free Tech Support.
【THINKCAR THINKTOOL PRO Main Features】
>>ALL RESET + INITIATION + ADAPTATION + MATCHING + CODING:
THINKTOOL Pro supports Auto VIN Detect, ECU Coding, Gear Reset, SAS Reset, TPMS Reset, DPF REG., Key Coding, BMS Reset, Throttle Matching, Oil Reset, ABS Bleeding, Brake Reset, Injector coding etc all of special functions, helping you safely and effectively access to the vehicle systems to reset partial parameters status after repair and maintenance work.
>>PROFESSIONAL BI-DIRECTIONAL Diagnostic TOOL:
Thinktool Pro diagnostic tool gives you what snap-on scanner offers. It features Bi-Directional Control (Active Test) to request information or command a actuator to perform specific tests, such as turning the fuel pump on and off, cycling the a/c clutch on and off, performing an evaporative emissions leak test, fast troubleshooting your car, not simply by reading codes, reading live data.
>>BEST HAREWARE + MODULAR DIAGNOSIS:
Compared with THINKTOOL,this upgraded version THINKTOOL Pro has more advanced hardware，including but not limited to Android system version,battery,bluetooth version,screen size.Besides,this upgraded scan tool Support 8 optional modules: printer, work light, videoscope, battery tester, scope box, thermal imager, moudledock, wireless TPMS tool（note: you can buy those models on ThinkStore）
>>ALL SYSTEMS DIAGNOSTICS For OVER 160 CAR MAKES:
THINKTOOL Pro diagnostic scanner works on over 160 car makes and 10000 models to read/erase codes, view live data, do bi-direction active test and service functions in all vehicle systems, including ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System, etc, gives your car a full detection.
>>STAR SERVICE USE EXPERIENCE:
THINKTOOL Pro offers you Remote Tech Diagnostic, 1to1 diagnostic feedback and respond, Data Stream record and playback, Vehicle Health Report, Maintenance Help etc customer star care.
>>Auto VIN read Function+ 31 RESET SERVICES：
ThinkTool PRO supports Auto VIN Detect, helps you get CAR info at once.THINKTOOL PRO provides you with free service functions(Gear Reset, SAS Reset, TPMS Reset, DPF REG., Key Coding, BMS Reset, Throttle Matching, Oil Reset, ABS Bleeding, Brake Reset, Injector coding etc), Gives you the ability to use dealership level relearn procedures to complete repairs or maintenance.
>>2 YEARS FREE UPGRADE + MULTI-LANGUAGE MENU:
connect with WIFI, you can free update multi-language car software with just one-click, and use this frequently-upgraded scanner to diagnose the newest vehicles on the market. We provides 5 YEARS warranty after sale date on Thinktool Pro scan tool. If you have any problem, please feel free to contact us.
2021 THINKCAR THINKTOOL pro Professional Diagnostic Tool CAR REPAIR SHOPS & MECHANICS 's First Choice !!!
>>THINKTOOL Pro supports eight functional modules, providing more possibilities for an outstanding device to be ready for any diagnostic circumstances.
A :8 optional modules: printer, work light, videoscope, battery tester, scope box, thermal imager, moudledock, wireless TPMS tool （note: you can buy those model on ThinkStore）
B: Work with wireless tire pressure diagnostic tool (optional accessory) toachieve the features of TPMS activation, programming and learning.
Note:
Eight Functional Modules The functional modules need to be purchased seperately.
Covering more than 150 car series and ten thousands of car models
>>Aisa: Compatible with Changcheng, Daewoo, Huachen, Zhongxing, Indian Tata, JAC, Maruti, Perodua, Chery, Isuzu, Jinlong, Suzuki, Saipa, HM, Hmazda, Ikco, Malaysia Proton, Luxgen, Toyota, Changan, Futian, Honda, Wuling, V-class, Jpisuzu, Kia, Indian Maruti, Indian Mahindra, Malaysia Perodua, Hafei, Lifan, Mahindra, Nissan, Xiali, Zhongshun, Tata, Changhe, China GM, Saicmg, Mazda, Zhongtai, Daihatsu, BYD Flyer, Hyundai, Proton, Subaru, Ssangyong, Joylong, Mitsubishi,Gonow, Qoros, Maxus, Mvm
>>Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR
>>USA: Compatible with Gm, USAFord, Chrysler, Willy; Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM
【Thinkcar Thinktool Pro 31+ Maintenance function 】
1 Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle.
2 Elec.Throttle Adaption
Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the ECU returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.
3 Steering Angle Reset
To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle.
4 Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.
5 ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer,ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
6 Break-pad Reset
lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.
7 DPF Regeneration
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reducePM ignition combustion) to stabilize the filter performance.
8 Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.
9 IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel,ECu,BCM, or remote control battery is replaced, anti-theft key matching must be performed.
10 Injector Coding
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.
11 TPMS Reset
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.
12 Suspension Matching
This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.
13 AFS Reset
This feature is used to initialize the adaptive headlamp system.According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture.
14 A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.
15 Sunroof Initialization
This function can set the sunroof lock off, closed when it rains,sliding / tilting sunroof memory function,temperature threshold outside the car etc.
16 EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
17 ODO Reset
a) ODo reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car
diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.
18 Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicatorlights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and theairbag computer can continue to use.
19 Transport Mode
ln order to reduce power consumption, the following functions may be disabled,including limiting thevehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At thistime, the transport mode needs to be deactivated to restore the vehicle to normal.
20 A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
21 Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function inECU(provided that the vehicle has a hidden function and supported by hardware).
22 NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf theNOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalyticconverter learned value stored in the engine ECu.
23 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required.
24 Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
25 Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
26 Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
27 Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover theautomatic ascending and descending function of power window.
28 Language Change
This function is used to change the system language of the vehicle central control panel.
How To Register THINKCAR ThinkTool Pro
Step1 :Setting language & Time Zone , Connect WIFI
Step2 :Agree the Register term
Step3 :Register an account with your Email box
Step4 :VCI Activate - Enter the serial number and Password to activate
How To Update THINKCAR ThinkTool Pro
ThinkTOOL PRO is with2 years free Update Click "Update" to One-Click Update
How To Printer the Diagnostic Report :
Two Ways Print : 1. Share the Diagnostic Report out via USB , then print . 2. Use Think Printer to print directly ( need buy Think Printer additional )
【High-end hardware configuration of ThinkTool Pro 】
Operating System: Android 10
Camera:Rear camera 8.0MP
Memory:2G
Storage:32G
Network:Wi-Fi, WL AN 802. 11b/g/n
Bluetooth: Bluetooth 5.0
Battery: 6000mAh/7.6V
Screen: 8 inches Storage
Working Temperature: 0°C ~ 50°C
Temperature:-20°C ~ 60°C
【Package List 】
1pcs THINKTool Pro HOST
1pcs Users Manual
1pcs Charging Cable
1pcs Diagnostic Dongle
1pcs Power Adapter
About Payment
About Shipping
Terms of sales
About us
Contact us
About Payment
We accept PayPal payment.
Pls contact us if you need to use another method to pay.
Pls finish Payment within
7 days
after bidding ends,o
therwise a unpaid item case will be opened to you.
About Shipping
All created orders will be shipped
within 1 business
day after payment been confirmed.
The shipment will be sent with USPS or UPS shipping from US warehouse in NJ or LA.
Delivery time varies from 2 to 6 business days.
If you didn't receive the package in the estimated time, please contact us at once,we will give you the best solution.
Terms of sales
We are authorize distributor of Launch and other brands, all items are 100% original.
All items can be returned within 30 days if you don't satisfy with it.
All items can be exchanged within 90 days if the item with functional error.
All items including 12 months free repair, just contact with the seller to proceed if with any problem.
About us
We are professional seller of automotive diagnostic tools
for more than 10 years.
We are one of the biggest distributor of Launch&Thinkcar diagnostic tools.
We have office and warehouse in US,UK,German,Australia,French and Russia.
We have more than 100 technicians and employees devoting to customer satisfaction.
Contact us
Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.
We will reply in 24 business hours.
Business time:
GMT8
(9:00-18:00) from Monday to Friday.
Brand
THINKCAR
Manufacturer Part Number
Thinktool Pros,PROS+,MK908P MK808,
OBD Interface
CAN, EOBD, OBD, OBDII
Supported System
ABS, DPF, EPB, SAS, SRS, TPMS, ENG, RESET, GEARBOX, OIL, IMMO, BMS, Full System
Vehicle Type
Passenger Vehicle
Features
Built-In Battery, Color Display, Backlit Display, Check Engine Light Shut Off, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly, Data Record and Replay, AutoVIN, Feedback, Reset Service
Accessories
USB Cable, Adapter Cable, Carrying Case, User Guide
Connectivity
WiFi,Bluetooth,OBDII Cable
Warranty
5 Year
software update
2 Year FREE Update
Operating System
Android 10
Display
8.0 inch
Battery
6000mAh/7.6V
ROM
32GB
Advantage 1
All Systems(ENG\AT\SRS\ABS\SAS\IC.etc.) ,ECU Coding, Active Test
Advantage 2
One-Click Update\identify VIN+28 Reset Functions（OIL\TPMS ETC.）
Advantage 3
BEST HAREWARE + MODULAR DIAGNOSIS(printer,TPMS ETC.)
Material
100% Brand new
Similar Model
MX808 MK808BT MK808TS DS808 DS708 MS906
Similar Model2
Maxisys Pro MK908P MS906BT MS906TS MS908 Elite
Similar Model3
LAUNCH X431 V+4.0 PROSV TT PROS PROS+