YA201 OBD Code Reader OBD2 Car Diagnostic Tool Battery Testing Auto Adapter Tool

Description

Store category
Sign Up Now !
You may also like
YA201 OBD Code Reader OBD2 Car Diagnostic Tool Battery Testing Auto Adapter Tool
Product Description
YA201 Car OBD2 Code Reader Check Engine Battery EOBD Scanner Diagnostic Tool
YA201 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
Note: YA201 only Support 12V cars, Does not support 24V Trucks.
Advantages of YA201
1.Data stream sorting
2.Find The Cause Of The Fault Code
3.Multi-Languages: English, Russian, German, Spanish, French, Italian, Portuguese, Japanese Chinese (Allows the user to change the language used by the tool. English is default.)
4.Free Update Life Time: Just Put in the USB, Copy and Paste the files into Flash disk .
5.Screenshut function: Press the up and down button together for about 3 seconds.
6.DTC Look Up: Looks up definitions of DTCs stored in scan tool, and shows the possiblecauses of the DTC. (NOt every DTC with possible causes reason)
7.Voltage Test: This function is used to monitor the voltage present on pin 16 of the OBDIIData Link Connector.
8.Option: Changes tool option displays tool information, and performs tool self-tests.
9.Unit: Changes measurement units display metric or imperial.
10.Data Logging: Turn on /off the data log function to record the device data through vehicle.
11.Self-test: Display Test . Used to check the display screen.
12.Keyboard Test : Verifies that the keys are working correctly.
How to use
YA201?
Locating Data Link Connector
1.Choose a location under driver side dash under steering wheel) and use that description in both places.
2. If unsure about location of dlc, check vehicl manual or reputable service center about location
Connect the tool
1. If the connector is not there a label should be there indicating the whereabouts of the connector.
2. If necessary, remove the cover from the DLC
3. Turn the ignition switch to the on position. Do not start the engine
4. Plug the OBD connector into the Data Link Connector.
5. The tool will attempt to identify the vehicle. If successful, the vehicle identifie lisplayed. if the vehicle cannot be identified, menus will be shown for you to select the vehicle manually
YA201 Functions
1. Diagnostic Functions
Use this function to select a vehicle and then proceed to the diagnostic Menu.
2. Read codes
Reads DTCs from vehicles computer with Koeo or KOE
3. Erase Codes
Deletes dtcs from vehicle s memory
4. Live Data
Live Data menu lets you view, record and playback real time PIDs data from the electronic control mod
In live data menu, you can insert the selected item to front by holding pressing the "ok" key for 3 seconds
1)All Datastream:
Views vehicle Parameter Identification Data(PIDs)in real time PIDs are displayed in either a text format or graph format when available
2)Graph Display
Show the live data via graph mode, selecte PIDs by "OK" key, enter the graph by "Return"key switch the PIDs by "UP"and "Down"key
3)Record
Record the PIDs frame, selecte PIDs by "OK" key,enter the record page by "Return" key. Select the storage slot location to start record
4)Playback
Choose the record slot to playback the live data, switch frame by"UP" and "Down"key
5. Freeze Frame
Displays a snapshot of operating conditions at the time of a fault.
6. Vehicle Info
Scan tool displays the vehicle's VIN number, Calibration ID (s) and CVNthat identify the software version in the vehicles control module (s.)The tool also displays In-Use Performance Tracking of importantreadiness monitors.
7.Component Test
Tool will display a list of components and their locations on the vehicle.This function will always appear on the Main Menu.
This selection will appear on the Diagnostic Menu only when the toollhas a list of component locations for the currently selected vehicle.
8. On-Board Monitoring
Scan tool controls the operation of vehicle components, tests or systems.
9. On Sensor Test
Displays oxygen sensor monitoring test results from the vehicle's memory,the O2 Monitor Test is NOT an ON-DEMAND TEST.
10. I/M Readiness
Displays a snapshot of the state of the vehicle's OBDII Monitors.
NOTE:
* To review I/M Readiness status,make sure that the ignition key is switched to ON with the engine off.
* Not all monitors are supported by all vehicles.There are two types of l/M Readiness tests:
* since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared.
* This Drive Cycle-shows status of monitors since the start of the currentdrive cycle.
YA201 Support OBD2 Protocols Car List:
1. SAE J1850 PWM(41.6Kbaud)
2. SAE J1850 VPW(10.4Kbaud)
3. ISO9141-2(5 baud init,10.4Kbaud)
4. ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP(fast init,10.4 Kbaud)
6. ISO15765-4 CAN(11bit ID,500 Kbaud)
7. ISO15765-4 CAN(29bit ID,500 Kbaud)
8. ISO15765-4 CAN(11bit ID,250 Kbaud)
9. ISO15765-4 CAN(29bit ID,250 Kbaud)
YA201 Code Reader Support Car List:
American Car :
Need Standard OBD2 Protocols from 2000 to now
for Chrysler , for Ford, for GM, For Jeep ...
European Car :
Need Standard OBD2 Protocols from 2003 to now
For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault
For Bentley , for Skoda , for Daewoo , for Benz , for Daihatsu , for Land Rover , for BMW , for Vauxhall , for Citroen , for Volvo , for Fiat , for VW , for Ford , for Jaguar...
Japanese/Korean Car:
Need Standard OBD2 Protocols from 2006 to now
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota...
Chinese Car:
Need Standard OBD2 Protocols from 2009 to now
Packing List:
1pc * YA201 Code Reader
1pc * English User Manual
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. Paypal is the only payment we accept.
2. Your package will ship out within 1 business day after payment cleared (not including holiday and weekend).
Delivery details
1. Shipping terms: Int'l Express / Registered Air mail.
Included but not limited to: USPS, UPS, DHL, Fedex, postal delivery, etc.
2. Shipping address supplied by Paypal is acceptable. Please make sure your address is correct and include phone number.
3. If not received item due to any unexpected factor, please wait patiently and contact us. Your understanding would be highly appreciate!
Terms of sales
1. We are not responsible for Buyer's Local taxes.
2. It is buyer's responsibility to complete clearance when parcel reached your Customs. We will try our best to help you get your package.
3. About return: please email us first for return address and instructions within 30 days after receipt. Items need to be in original conditions.
About us
1. We are specialized dealer of OBD tools and automotive electronics.
2. We support remote assistance by teamviewer if you have any difficulty in software installation.
3. Our items come with warranty and good service.
Contact us
1. Any questions, you can feel free to contact me via email / ebay message / whatsapp.
2. Please contact me first before giving negative feedback or opening case. Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.
Feedback